Jaguar XF X250 BCM Body Control Module / CJB Central Junction Box 2013-2015 DX23-14B476-AG Reset To NEW / Virgin

£200.00

MotorTronics provides a prompt test and Refurbishing service for your electronic modules, The modules goes through various testing processes to ensure parameters are fully working, only after this, we pass it and it’s ready for dispatch.

All that is left for you to do is

1. Click Buy it Now / Add to Cart
2. Fill in the Order Form / Packaging Slip provided after the payment page.
3. Send your Module with the Order Form
4. Await Refurbishing while we have your part(s)

Description

Jaguar XF X250 BCM Body Control Module / CJB Central Junction Box 2013-2015 DX23-14B476-AG Reset To NEW / Virgin

  1. We Re-program the Processor / MCU to BRAND NEW Data from the Factory,
    1. No previous keys is stored.
    2. No Vehicle Configuration
    3. No immobiliser data
    4. No Vin Number
  2. Ready to be Programmed to the vehicle as NEW MODULE.

This Service is only suitable for Saloon X250 Jaguar XF with the BCM part number of DX23-14B476-AG since we have BAND NEW Factory Data for  this BCM.

The Following Part number are all interchangeable

  • DX23-14B476-AD
  • DX23-14B476-AE
  • DX23-14B476-AF
  • DX23-14B476-AH
  • DX23-14B476-AJ

We Offer Mobile Call-Out programming services if you are relatively local to us for an addition fee.

Programming Procedure

  • If using JLR SDD you will need to run:
    • “Configure New Modules – Central Junction Box (Body Control Module)” under the Service Tab.
  • If using Autologic you will need to:
    • Copy all the auto configuration data from the CJB Rear smart junction Box (RSJB) to the Front Smart junction Box (FSJB)
    • Then, program the Keyless Vehicle Module (KVM) as an existing module.
    • CJB programming and perform all after-programming routines, including copying the auto configuration from the RSJB, learning chassis number, learning the target identifier (security) and verifying the Keys.
    • It is possible that the immobilizer reset function should be performed and finally re-provision the modules.

If you require any assistance, give us call and we should be able to guide you through the process.