Jaguar XF Saloon Rear BCM Auxiliary Rear Junction Box AJB RJB Body Control Module B BCMB Replacement Service
Jaguar XF Saloon Rear BCM Auxiliary Rear Junction Box AJB RJB Body Control Module B BCMB Replacement Service - Image 2

Jaguar XF Saloon Rear BCM Auxiliary Rear Junction Box AJB RJB Body Control Module B BCMB Replacement Service

£800.00

MotorTronics provides a complete programming solution for your electronic modules. The modules go through various data programming processes to ensure all data is extracted / matched or modified to be plug and play. Only after this, we pass it and it’s ready for dispatch.

All that is left for you to do is:

1. Click Buy it Now / Add to Cart.
2. Fill in the Repair Form provided after the payment page, also emailed.
3. Send your original BCM (Marked Original) with the Repair Form.
4. Await programming while we have your part(s).
5. Once received, simply plug it in and turn the key.
6. In some cases, you will require diagnostics to adapt / clear codes.

Category: Tags: , , , , , , , , , , , , , , , , , , , , , ,

Description

Jaguar XF Saloon Rear BCM Auxiliary Rear Junction Box AJB RJB Body Control Module B BCMB Replacement Service

These commonly fail due to internal components aging and component failures. Some of the faults include but are not limited to:

  • Hazard Switch Circuit
  • Foot Brake Switch Circuit
  • Start Stop Circuit
  • Fuel Gauge Circuit
  • Low Pressure Fuel / Lift Pump Relay Circuit
  • Boot Release Switch Circuit
  • Boot Open / Ajar Circuit

This service is to replace the Rear BCM / RJB.

    1. We re-program the processor / MCU on the replacement BCM using data from the original BCM
    2. Ready to be programmed to the vehicle as a new module

These come in various part numbers, which are all the same. The main difference is one is for Saloon and the other is for Estate / Sportbrake. The following part numbers are for the Saloon:

  • CX23-14D628-AE
  • CX23-14D628-AF
  • CX23-14D628-AG
  • DX23-14D628-AD
  • DX23-14D628-AE
  • DX23-14D628-AF
  • DX23-14D628-AH
  • DX23-14D628-AJ
  • C2Z32179

We offer mobile call-out programming services if you are relatively local to us for an addition fee.

Programming Procedure

  • If using JLR SDD you will need to run:
    1. “Configure New Modules – Central Junction Box (Body Control Module)” under the Service Tab.
  • If using Autologic Diagnostic / Opus Equipment you will need to:
    1. “Copy From FSJB to RSJB” under the “Vehicle Configuration” Tab
    2. Program the “Keyless Vehicle Module” (KVM) as an existing module in the “Module Programming and Replacement” tab
    3. All after-programming routines, including copying the auto configuration from the FSJB, learning chassis number, learning the target identifier (security) and verifying the Keys.
    4. It is possible that the immobilizer reset function should be performed and finally re-provision the modules.

If you require any assistance, give us call and we should be able to guide you through the process.

Related products